Welcome our website!.http://www.louisvu.com/ Log In  |   account

MA2212 KV1000 Brushless Motor & Simonk 30A ESC & 1045 CW/CCW Prop for DJI F450 Frame Quadcopter

Price:  $20.30

  • Model: RM2167
  • 888 Units in Stock



Add to Cart:




MARSPOWER MA2212 KV1000 Brushless Motor
Brand Name: MARSPOWER
Item Name: MA2212 Brushless Motor
KV: 1000KV available
Diameter: 3.17mm
Shaft diameter: 28.5mm
Compatible propellers size: 1147,1047,9060,8040,8060

MR.RC Simonk 30A ESC
This hardware, with the SimonK firmware, gives you the perfect solution for multirotor use.
Highest efficiency 100% N-FET design.
Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
No low voltage cutoff, because any cutoff in a multirotor = crash.
No over temp cutoff, because any cutoff in a multirotor = crash.
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation! Nothing to program other than the throttle range.

Note (SimonK): Before you buy these, you should make yourself familiar with the somewhat experimental nature of the SimonK firmware. This software pushes the motor response to the limit, so there may be motor and prop combinations that won't work. Due to the lack of overcurrent/overheat/low voltage sensing (needed for multirotors), it's easier to destroy the ESC and possibly the motor too. I can't tell you what will or won't work, other than the motors I sell that I've personally used, so please consult the main SimonK threads on various forums for more info. Neither I, nor SimonK will be responsible for any damage that may occur, so know and accept the risks before using these. That said, I've personally had fantastic results with this firmware and wouldn't use anything else!

Max cont. current: 20A
Peak current: 30A (10s)
Voltage: 2-3S lipo, 5-8 Nicad
BEC: 5V/3A

1045 CW/CCW Prop
High quality and durable in use, Easy to install.
Material:Carbon Nylon
Size: 10 x 4.5''
Diameter of Shaft: 6.0mm
Thickness of center: 9.7mm
Recommended wheelbase: 550mm - 700mm
Recommended motor: 800KV - 1100KV

Package size: 30 * 15 * 5cm / 12 * 6 * 2 in
Package weight: 136 g / 4.8 oz

Package list:
1 * MARSPOWER MA2212 KV1000 Brushless
1 * MR.RC Simonk 30A ESC
1 * Pair 1045 CW/CCW Prop








;;;;;;;;

Choose a ranking for this article, from 1 star (worst) to 5 stars (best):



NOTE : HTML tags are not allowed.
NOTE: Reviews may require prior approval before they will be displayed